How do I monitor fuel events using an analog connection?

You may use below method to monitor Fuel events using Analog or Fuel Float Connection (without Fuel level sensor (FLS installation)

Analog fuel monitoring (Ruptela device)

Step 1: Connect the Device analog input line to Vehicle fuel gauge

Step 2: Connect the device to Ruptela configurator

Step 3: Open “Diagnostic tool”

KsjSWHEWvK1IkiUtAGs c7XSjXlJXq8qt3Gg5czqKRj1poKpCBatk5tGDe2wB1a56zh0t3tWgHWtfuRteBzq6ajY3R09M9BRLNOMN3WSKtwI7UrsNQutOOqdW7qEO930GmivUBAs

Step 4: Choose the device com port and click “Connect”

Step 5: You may note the analog value for corresponding fuel level and share the calibration table with AVLView support team

Support email: support@avlview.com

Our team will help you configure the same in the AVlView platform.