Ruptela - Configure iButton

Please follow below steps to configure ibutton in Ruptela device

Step 1: Connect the device

Connect Ruptela device to the configurator

Step 2: Open IO setting window

Click “options” shown below “IO events”

Step 3: Choose an empty slot

Choose an empty slot to which the newly selected parameter needs to be set

Step 4: Open ID drop down list

Open the ID drop down list and select “iButton driver ID”. Once done, ‘Enable’ checkbox to activate the parameter (if this checkbox is not ‘Enabled’, the parameter will not be set in the selected slot)

Step 5: Set ‘Event on’ to Change

Set the “Event on” to change and set the “Priority” as “High”

You’ve successfully configured the Ruptela ibutton.